Products Details

Current Location :Products

CRISTAL 113

CRISTAL 113

 Cristal 113 is an alumina/silica modified rutile pigment, produced by the chloride process. The pigment has ben designed for use in highly loaded flat and semi-gloss finishes, both water and solvent based. The product offers exceptional hiding power when dry compared with traditional multi-purpose grades and can offer improved performance when formulated correctly.

  Cristal 113 exhibits excellent brightness, high tint strength and an exceptionally clean tint tone as well as an outstanding dry hiding potential. Wet hiding of the product is equivalent to the multi-purpose grades used in the same applications. With a higher than average TiO2 content for pigment in its class, it also exhibits a lower level of porosity than conventional pigments, leading to improved wash and scrub resistance.

  Cristal 113 is also recommended for use in high hiding low gloss water based flexographic inks where the exceptional coverage provided by the pigment is of benefit. The grade also finds some use in textiles and paper where a rutile grade is desirable.

Typical Properties                              Test Method

TiO2 Content(%)

87.5

3LP 0053

Specific Gravity (kg/l)

3.85

*

Bulk Density(kg/l)

0.52

*

Tint Strength

600

3LP 0508

Hiding Power

212

3LP 0504

Oil Absorption (g oil/100g pigment)

37.5

3LP 0519

Water Demand(g water/100g pigment)

44.0

3ML 0022

pH

7.65

3LP 0521

Specific Resistance(ohms)

8,000

3LP 0521

Average Particle Diameter (μm)

0.25

*

  *Denotes relative unchanging property, controlled in-process. The above properties do not consist a specification. Specifications are available on request.

 Packaging

 25 kg multi-all paper bags, palletized and shrink-wrapped, 1,000 kg per pallet.

 

CRISTAL 113        Material Safety Data:

 Product Identification

  Trade name

CRISTAL 100

  Manufactured by:

The National Titanium Dioxide Co.Ltd

PO Box 13586

Jeddah 21414

Kingdom of Saudi Arabia

  Telephone:

+966(0)2 651 9883/653 0104

  Facsimile:

+966(O)2 651 8757/653 3382

  Email:

info@cristalarabia.com

 Composition/ Information on Ingredients The Preparation consists of the lollowing

  Material

CAS Number

Typical Range(%)

  Titanium Dioxide

13463-67-7

84.0 - 91.0

  Aluminium hydroxide

21645-51-2

2.0-4.0

    Amorphous silica

112926-00-8

6.0 – 9.0

  A fractional percentage of organic additive is also present. None of the above substances are reported as potential carcinogens by OSHA.

 Hazard Information Adverse human health effects

  Preliminaries

Inert nuisance dust. Can cause lung irritation.

  Primary route of entry

Inhalation of airborne dust

  Symptoms of exposure

Coughing, sneezing or irritation of the mucous membrane.

  Restrictive conditions

Breathing or respiratory tract disorder/disease would be aggravated by exposure to  

airborne dust.

  Eyes

Inert foreign body hazard.

 First Aid Measures

  Inhalation

Remove to fresh air.

  Eyes

Flush with large amounts of water. If irritation persists, seek medical attention.

  Skin

Wash with water and mild soap.

  Ingestion

No adverse health effects during the course of normal industrial handling. If large quantities ingested, seek medical attention.

 Fire Fight Methods

  Extinguishing media

 No fire hazard.

  Precautions should be taken against static discharge of electricity during powder handling operations

 Accidental Release Measures

  Use any mechanical means to remove powder. Avoid dusting. Prevent entry to natural waterways.

 Handling and Storage

  Handling

 Use suitable ventilation to prevent excessive inhalation and skin contact. Avoid static discharge during powder handling operations.

  Storage

Store in dry area. Wet material may become very slippery.

 Exposure Controls/Personal Protection

  Exposure control

Generally handle in area of good ventilation. If airborne dust in over or thought to approach the occupational exposure standard, local exhaust may be necessary.

  Respiratory protection

Use approved dust respirator if OES is likely to be exceeded.

  Hand protection

Use gloves for prolonged /repeated contact.

  Eye protection

Use safety glasses / goggles.

  Skin protection

Wear normal protective overalls. Sensitive skin can be protected further by use of a barrier cream or moisturizer.

 Physical and Chemical Properties

  Appearance

 Fine white powder

  Odour

 Odourless

  pH

7.5(Typical)10%slurry

  Melting point °C

1,840

  Boiling point °C

2,500—3,000

  Decomposition °C

N/A

   Flash point °C

N/A

  Autoignition °C

N/A

  Explosion properties

N/A

  Relative density

4.1(water=1)

  Solubility(Water)

 Insoluble

  Other data

 

  Bulk density kg/l

0.64 – 0.88

 Stability and Reactivity This product is chemically stable, and non-reactive

  Conditions to avoid

None

  Materials to avoid

 None

  Hazardous decomposition

 None

 Toxicological Information This product is non-toxi and physiologically harmless

  Occupational exposure limits:

 

  Titanium (OES)

10mg/m3 (8 hour TWA)

5mg/m3  (8 hour TWA )

 Ecological Information

 No known harmful effects on Goldorfen (Leuciscus Idus) with 1 g/litre concentration (Maximum testing). Water flea (Daphnia Magna) with 1 g/litre concentration (No aquatic Toxicity). Available evidence suggests that titanium dioxide does not cause any significant adverse environmental effects.

 Disposal

 This product does not constitute any known hazard for disposal into sanitary landfill or industrial waste didposal landfill. Attention should however be paid to local and nation waste regulations.

 Transport Information

  This material is not classified as a dangerous good by international transport regulations.

 Regulatory Information

No Hazard Labelling is required for this Produce. This product is given an OES under the Control of Substances Hazardous to Health regulations, as per the Health and Safety Executive in the United Kingdom.

 Other Information

    None.

The above is provided for guidance only.

For further information contact Cristal Tehnical Sales and Services:

TEL: +966(0)2 651 9883/6530104

FAX: +966(0)2 651 8757/653 3382

EMAIL: info@crlstalarabia.com

  
previous item: CRISTAL 121 next item: CRISTAL 100