Cristal 134 is an alumina/silica modified rutile pigment produced by the chloride process and is specifically designed for plastic and plastisol applications. The grade is characterized by its fine particle size, providing a blue tone, which is widely recognized as required for Plastic applications.
Cristal 134 is widely accepted in polyolefin master batch formulations and is also recommended for rigid vinyl pipe formulations and can be used in other applications including PVC floor tiles, vinyl wall-coverings and some rubbers.
Cristal 134 meets the Plastic Pipe Institute guidelines for formulation substitution and is authorized by the National Sanitation Foundation for general Interchangeability in NSF listed formulations. It is also certified for use in food contact applications according to EC directive 95/3/EEC heavy metal content.
Typical Properties Test Method
Moisture Content (%)
Oil Absorption(g oil/100 g pigment)
Average Particle Diameter（μm）
* Denotes relative unchanging property, controlled in-process. The above properties do not constitute a specification. Specifications are available on request.
25 kg multi-all paper bags, palletized and shrink-wrapped, 1,000 kg per pallet.
CRISTAL 134 Material Safety Data
The National Titanium Dioxide Co．Ltd
PO Box 13586
Kingdom of Saudi Arabia
+966(0)2 651 9883／653 0104
+966(O)2 651 8757／653 3382
Composition/Information on Ingredients The preparation consists of the following
Typical Range (％)
A fractional percentage of organic additive is also present. None of the above substances are reported as potential carcinogens by OSHA.
Hazards Information Adverse human health effects
Inert nuisance dust. Can cause lung irritation.
Primary route of entry
Inhalation of airborne dust.
Symptoms of exposure
Coughing, sneezing or irritation of the mucous membrane.
Breathing or respiratory tract disorder/disease would be aggravated by exposure to airborne dust
Inert foreign body hazard.
First Aid Measures
Remove to fresh air.
Flush with large amounts of water. If irritation persists, seek medical attention.
Wash with water and mild soap.
No adverse health effects during the course of normal industrial handling. If large quantities ingested, seek medical attention.
Fire Fighting Methods
No fire hazard.
Precautions should be taken against static discharge of electricity during powder handling operations.
Accidental Release Measures
Use any mechanical means to remove the powder. Avoid dusting. Prevent entry to natural waterways.
Handling and Storage
Use suitable ventilation to prevent excessive inhalation and skin contact. Avoid static discharge during powder handling operations.
Store in dry area. Wet material may become very slippery.
Exposure Controls / Personal Protection
Generally handle in areas of good ventilation. If airborne dust is over or thought to approach the occupational exposure standard, local exhaust may be necessary.
Use approved dust respirator if OES is likely to be exceeded.
Use gloves for prolonged / repeated contact.
Use safety glasses / goggles.
Wear normal protective overalls. Sensitive skin can be protected further by use of a barrier cream or moisturizer.
Physical and Chemical Properties
Fine white powder
Melting point °C
Boiling point °C
N / A
Flash point °C
N / A
N / A
N / A
Bulk density kg/l
0.64 - 0.88
Stability and Reactivity This Product is chemically stable, and non-reactive
Conditions to avoid
Materials to avoid
Toxicological Information This product is non-toxi and physiologically harmless
Occupational exposure limits：
Titanium dioxide (OES)
10mg／m3(8 hour TWA)
5mg／m3 (8 hour TWA)
No known harmful effects on Goldorfen (Leuciscus Idus) with 1 g / litre concentration (Maximum testing). Water flea (Daphnia Magna) with 1 g/litre concentration (No aquatic Toxicity). Available evidence suggests that titanium dioxide does not cause any significant adverse environmental effects.
This product does not constitute any known hazard for disposal into sanitary landfill or industrial waste disposal landfill. Attention should however be paid to local and national waste regulations.
This material is not classified as a dangerous good by international transport regulations.
No Hazard Labelling is required for this Product. This product is given an OES under the Control of Substances Hazardous to Health regulations, as per the Health and Safety Executive in the United Kingdom
The above is provided for guidance only.
For further information contact Cristal Tehnical Sales and Services：
TEL： +966(0)2 651 9883／6530104
FAX： +966(0)2 651 8757／653 3382